广播音频信号报警器
论文编号:DZXX377 论文字数:12516,页数:38摘要
广播音频信号报警器由报警器和统计查询两部分组成，报警器由单片机控制，负责实时监测立体声，二路音频信号，如果发现停播，立即记录停播的日期和时间，信号恢复的时间等信息，并将它们存储在单片机内部的E2PROM，一旦有IC卡插入，便将储存在E2PROM中的停播信息储存到IC卡上，再通过IC卡将停播信息用读卡器输入到电脑里，或直接由电脑通过RS-485接口从报警器处读取数据，再由管理软件进行分析汇总最后用报表的形式打印出来。管理软件还可以通过数据库处理，实现查询、统计等功能。本文试从以下几个方面对该报警器的设计开发过程进行论述：
1、问题的提出，简要地说明了在怎么样的背景下开发该系统的。
2、该报系统的设计思想。
3、各部分较为详细的流程，程序语句。
4、开发手段的简要论述。
关键字 报警器，单片机，E2PROM，IC卡，数据库
ABSTRACT
The broadcast tonic train signalling alarm apparatus inquires two parts by the alarm apparatus and the statistics to be composed, the alarm apparatus by the monolithic integrated circuit control, is responsible for the real-time monitor stereo sound, two groups tonic train signallings, if discovered stops broadcasts, records the date and the time immediately which stops broadcasts, information and so on time which the signal restores, and saves them in monolithic integrate d circuit interior E2PROM, once has the IC card insertion, then will store up in E2PROM stops broadcasts the information storage to embrace to IC, again will stop through the IC card broadcasts the information with to read the card input to the computer in, or directly will read the fetching by the computer through the RS-485 connection from the alarm apparatus place according to, Again by manages software to carry on the analysis to compile finally uses the report form the form to print. Manages software also to be allowed through the database handling dbh, function and so on realization inquiry, statistics. This article tries from following several aspects to carry on the elaboration to this alarm apparatus design performance history:
1st, question proposing, briefly explained how background develops this system under.
2nd, this newspaper system design thought.
3rd, each part of more detailed flows, procedure statement.
4th, development method brief elaboration.
Keyword Alarm，Monolithic integrated circuit，E2PROM，IC card，Database
目录
摘要 I
ABSTRACT II
第1章 绪论 1
1.1 研究背景和意义 1
1.2 研究内容 1
1.3 研究中需要注意的问题 2
1.4 章节安排 2
第2章 报警器的原理 3
2.1 报警器框图 3
2.2 报警器各部分功能的设置 3
2.2.1 输入部分 3
2.2.2 电平指示和报警电平设置 5
2.2.3 报时信号检测和实时时钟电路 7
2.2.4 单片机 11
第3章 报警器的设计 15
3.1 IC卡的选择 15
3.2 程序框图和接口 17
3.3 应用程序开发 19
3.3.1 界面设计 20
3.3.2 数据库的设计 24
3.3.3 读卡器、IC卡与程序之间的通信 28
第4章 总结 29
4.1 存在的问题 29
4.2 前景 29
致谢 30
参考文献 31
附录1 33
页:
[1]